6×19 Steel Wire Rope
General-purpose 6×19 constructions for hoisting, lifting and drawing equipment.
- Constructions 6×19+FC, 6×19+IWS, 6×19+IWR
- Diameter range 3 mm – 80 mm
- Tensile strength 1570 – 1960 MPa
- Surface Ungalvanized / Galvanized
- Data fields Weight (kg/100m), MBL (kN)
- Listed applications Hoisting, lifting, drawing
Product overview
6×19 steel wire rope is available in galvanized and ungalvanized versions with fiber-core and steel-core configurations shown in the current data sheet. The series is listed for hoisting, lifting and drawing applications and includes diameter and minimum breaking load data across multiple tensile-strength grades.
Construction options
6×19+FC
Fiber core
6×19+IWS
Independent wire strand core
6×19+IWR
Independent wire rope core
Key technical data
Values vary by construction, core type, diameter and tensile-strength grade.
| Nominal diameter (mm) | Approx. weight (kg/100m) | Tensile strength (MPa) | Minimum breaking load (kN) |
|---|---|---|---|
| 3–80 | See data sheet | 1570–1960 | See construction table |
Values vary by construction, core type, diameter and tensile-strength grade. Source MBL values are not working load limits (WLL/SWL).
Listed applications
The current CWRS technical data lists this rope family for the following uses.
Hoisting equipment
The current CWRS technical data lists this rope family for hoisting equipment.
Lifting equipment
Listed for lifting service.
Drawing / pulling
Listed for drawing and pulling equipment.
How to select / selection inputs
Send the fields below for a technical recommendation. Do not treat this form as an automatic rating tool.
Installation & handling
Follow the CWRS unwinding, cutting, maintenance and inspection guidance topics when preparing installation. Final handling instructions should match the supplied rope construction and the equipment manual. Source library topics include unwinding, reel winding direction, cutting, maintenance/inspection and pulley groove guidance.
Related technical guides
Wire Rope Construction Basics
Strand notation and family overview.
Guide topicCore Type Guide
FC vs steel-core options in the data sheets.
Guide topicMinimum Breaking Load Guide
Reading MBL columns correctly.
Guide topicDiameter Measurement
How nominal diameter is presented.
Guide topicRelated wire rope products
Frequently asked questions
Which core types are available for 6×19?
The current data shows 6×19+FC, 6×19+IWS and 6×19+IWR.
What diameter range is listed?
3 mm to 80 mm in the current source data.
Is galvanizing available?
Yes. Both ungalvanized and galvanized forms are listed.
What applications are listed?
Hoisting, lifting and drawing equipment are listed in the source applications line.
Request a quote / technical recommendation
Send construction, diameter, core type, surface, tensile grade, required MBL, length and application details. CWRS can respond with matching data-sheet options.