6×7 / 6×9 Round Strand Steel Wire Rope
Galvanized and ungalvanized wire rope constructions for cable carriage, conveying, ropeway and winch applications.
- Constructions 6×7+FC, 6×7+IWS, 6×9W+FC, 6×9W+IWR
- Diameter range 2 mm – 50 mm
- Tensile strength 1570 – 1960 MPa
- Surface Ungalvanized / Galvanized
- Data fields Weight (kg/100m), MBL (kN)
- Listed applications Cable carriage, conveyor, ropeway, slope winch
Product overview
6×7 and 6×9 round strand steel wire ropes are available in galvanized and ungalvanized configurations with fiber-core and steel-core options shown in the existing technical data. The series covers a wide diameter range and is listed for cable carriage, conveyor, ropeway drawing and slope winch applications.
Construction options
6×7+FC
6×7 with fiber core
6×7+IWS
6×7 with independent wire strand core
6×9W+FC
6×9W with fiber core
6×9W+IWR
6×9W with independent wire rope core
Key technical data
Values vary by construction, core type, diameter and tensile-strength grade.
| Nominal diameter (mm) | Approx. weight (kg/100m) | Tensile strength (MPa) | Minimum breaking load (kN) |
|---|---|---|---|
| 2–50 | See data sheet | 1570–1960 | See construction table |
Representative range from the source library. Exact Approx. Weight and MBL values vary by construction, core type, diameter and tensile-strength grade. Source MBL values are not working load limits (WLL/SWL).
Listed applications
The current CWRS technical data lists this rope family for the following uses.
Cable carriage
Listed in the current CWRS technical data for various cable carriage systems.
Rope / belt conveyor
The current data lists rope and belt conveyor applications for this family.
Ropeway drawing
Listed for ropeway drawing service.
Slope winch
Listed for slope winch applications.
How to select / selection inputs
Send the fields below for a technical recommendation. Do not treat this form as an automatic rating tool.
Installation & handling
Follow the CWRS unwinding, cutting, maintenance and inspection guidance topics when preparing installation. Final handling instructions should match the supplied rope construction and the equipment manual. Source library topics include unwinding, reel winding direction, cutting, maintenance/inspection and pulley groove guidance.
Related technical guides
Wire Rope Construction Basics
Understand strand and core notation used across CWRS data sheets.
Guide topicCore Type Guide
FC, IWS, IWR and related core options.
Guide topicGalvanized vs Ungalvanized
Surface options listed in the current technical data.
Guide topicMinimum Breaking Load Guide
How MBL is presented in CWRS tables (not WLL/SWL).
Guide topicRelated wire rope products
Frequently asked questions
Which constructions are shown for 6×7 / 6×9?
The current technical data shows 6×7+FC, 6×7+IWS, 6×9W+FC and 6×9W+IWR.
Is galvanized rope available?
Yes. The source data lists both ungalvanized and galvanized forms.
What diameter range is listed?
The current data sheet shows diameters from 2 mm to 50 mm.
What applications are listed?
Cable carriage, rope and belt conveyor, ropeway drawing and slope winch are listed in the source applications line.
Request a quote / technical recommendation
Send construction, diameter, core type, surface, tensile grade, required MBL, length and application details. CWRS can respond with matching data-sheet options.