Elevator Steel Wire Rope
8×19S and 8×19W constructions listed for elevator and derricking machinery.
- Constructions 8×19S+FC/IWR, 8×19W+FC/IWR
- Diameter range 8 mm – 24 mm
- Tensile strength 1470 – 1870 MPa
- Data fields Weight (kg/100m), MBL (kN)
- Listed applications Elevator; derricking machinery
Product overview
Elevator steel wire rope is shown as 8×19S and 8×19W with FC and IWR options. The current diameter range is 8–24 mm. Elevator standard numbers, brand compatibility, traction ratio and fatigue-life claims are not provided in the source library.
Construction options
8×19S+FC / IWR
Seale elevator construction
8×19W+FC / IWR
Warrington elevator construction
Key technical data
Values vary by construction, core type, diameter and tensile-strength grade.
| Nominal diameter (mm) | Approx. weight (kg/100m) | Tensile strength (MPa) | Minimum breaking load (kN) |
|---|---|---|---|
| 8–24 | See data sheet | 1470–1870 | See construction table |
Values vary by construction, core type, diameter and tensile-strength grade. Source MBL values are not working load limits (WLL/SWL).
Listed applications
The current CWRS technical data lists this rope family for the following uses.
Elevator
Listed in the current CWRS technical data for elevator service.
Derricking machinery
Also listed for derricking machinery.
How to select / selection inputs
Send the fields below for a technical recommendation. Do not treat this form as an automatic rating tool.
Installation & handling
Follow the CWRS unwinding, cutting, maintenance and inspection guidance topics when preparing installation. Final handling instructions should match the supplied rope construction and the equipment manual. Source library topics include unwinding, reel winding direction, cutting, maintenance/inspection and pulley groove guidance.
Related technical guides
Core Type Guide
FC and IWR options.
Guide topicMinimum Breaking Load Guide
MBL reading.
Guide topicMaintenance & Inspection
Handling and inspection topics.
Guide topicRelated wire rope products
Frequently asked questions
Which constructions are listed?
8×19S and 8×19W with FC and IWR options.
What diameter range is listed?
8 mm to 24 mm.
What applications are listed?
Elevator and derricking machinery.
Request a quote / technical recommendation
Send construction, diameter, core type, surface, tensile grade, required MBL, length and application details. CWRS can respond with matching data-sheet options.